Baskets come in three different sizes and a few different finish options . They are only available in 18", 24" and 30" wide units. - The program will not allow you the user to add a basket into any component that is a width other than those available. Ensure the component is a standard width - 18, 24 or 30 inches.
Select ‘Basket’ from the pull-out part options and drag into your Pull-Out drop down and move into the component. Scroll the mouse wheel to select between the different basket sizes before insertingplacing. Left click to insert place the basket.
GIF
Like drawers, you users can continue to add as many multiple baskets as you’d like until you until right clicking to turn the tool off. Baskets also move and delete just like other parts. . When a basket is inserted, it automatically inserts fixed shelves where required. This location will depend on the height and quantity of baskets added and may shift as you add/change them.
If placing into a width that is not supported, the user will get a warning. Adjust the component width to a standard size to accommodate.
IMG
After the basket has been insertedplaced, you can use the + and - icons to change the size/height, just like in the image below left.
Use the part properties menu to adjust the depth (if offered), the finish, and any insert options. When a basket is inserted, it automatically inserts fixed shelves where required. This location will depend on the height and quantity of baskets you have. Like pantry drawers, you can use the Shelf Above and Shelf . Any baskets above will automatically move up or down to accommodate. If deleting a basket in the middle or bottom of a stack, the drawers above will remain where originally placed. Move as needed.
GIF
| Info |
|---|
Baskets move and delete like other parts <LINK?>. |
3D IMG/GIF
BASKET PROPERTIES
Use the basket Properties [Part] menu to make adjustments to the baskets in the design. Any fields that have a check box to the left can be applied to others using the Apply properties to.. options at the bottom of the menu.
...
The Depth field allows the user to change the basket to a shallower depth, if available. This may be because to system backing.
Use the Shelf Above/Below to adjust the location of the fixed shelves for each basket. “Auto” means it is following the rules written into the program - “Off” will remove the shelf, “On” will force the shelf to show. This is helpful if you’d prefer a different orientation than what the program automatically offers.
BASKET PROPERTIES
sdfsdf. Always consult with a Plan Reviewer if shifting shelves, as some may be needed for stability.
The Finish can be selected or changed in the drop down menu, as well as any basket liners or inserts that may be available.
Offsets are used if placing baskets behind doors <LINK>.
...
RELATED PAGES:
fghfghfgh<LINK>
fghfgh<LINK>