When adding a new component, moving the cursor up/down before placement will determine the mounting type <LINK>. There are various ways to change mounting type after the component is in the Design Zone design zone.
1 | Quickly and easily change an off-the-floor component to a to-the-floor by hovering near the bottom of the component until an arrow appears. The arrow will turn green when ready to be clicked. 
| ||
|---|---|---|---|
2 | Switch back and forth between component mounting types by going into the Properties [Comp] menu and changing the Mounting Type under the Construction heading.  This change can be applied to multiple components if desired using the Apply To options.
|
...
The program offers additional ways to globally change mounting type for all components in a design using the Set All to Floor/Wall Mounted feature. This is an easy way to show a customer the difference in cost or appearance between the two options. It is recommended to first make a copy of the design so there is always have the original to revert back to.
...
Click on the Settings tab in either the ELV or 3D view. From the Unit Mounting Type section of the ribbon toolbar, select Set All Floor Mounted or Set All Wall Mounted.
When the Auto Update Height feature box is checked, it will lock the height of certain parts (such as hanging poles) when the toe kick is added. This ensures that the distance between the hanging pole and the floor (the hang height) remains the same. However, this will change the top shelf height to accommodate.
...
| Info |
|---|
When switching to a wall mount, support cleats <LINK> may automatically be added. |
...
| Note |
|---|
This is important to be aware of, as a customer may require a very specific hang height for items, which has now been compromised. |
...
RELATED PAGES: