Panels, often referred to as applied panels, can be used to create a decorative or accent panel on a specific area in (or between) a component(s). They are not structural, like true system backing. They will not be routed into the shelves or pars, but rather fit exactly into the space given.
| Note |
|---|
This means that users must exercise caution when adding any panels to a design, and may need to have a conversation with a plan engineer reviewer regarding how it will be properly installed. |
...
| Note |
|---|
The current version of the panel tool does not recognize suspension rails(this may even be visible in 3D depending on the material thickness), which means this could cause trouble when being installed. There are a few ways you can bypass this issue, either by changing the back offset (see below), by adding a faceplate, or by discussing a solution with your design manager or production team in personplan viewer. |
PANEL PROPERTIES
Users can make adjustments to the panel in the Properties [Part].
...