A base cabinet is created by adding parts to a floor-based component, typically one that is 24” deep. They can be placed in closets, offices, media centers, or any other space that requires a lower component with a countertop.
...
...
There are various part configurations used to design a base cabinet, and these configurations will determine the overall height of the top shelf or countertop. The height should be considered based on the use of the cabinet.
IMG
| Info |
|---|
Search typical heights for items like desks, vanities, etc. if you are unsure what an appropriate height may be for its use. |
...
Start by adding parts, such as drawers, starting at the bottom and moving upwards. Then, adjust the height of the top shelf <LINK>by grabbing it with your mouse and pulling it down to the desired height (left), or to sit directly on top of the component parts.
GIF
The dimension that is shown on the right is called the Spot Height. It will appear at the top of a fixed shelf and shows the distance from the floor to the top of that shelf or component. Remember, these components do not yet have a countertop, which will increase the height even more.
If adding doors or a multi-shelf group, notice that they have a blue Auto at the top. This means they are considered Auto Height parts, and they will automatically shrink or expand in height as the top shelf height is changed.
GIF
There can only be one Auto Height part per component. If adding a part at full height, click and drag the top shelf down to the desired base cabinet height and the part will shrink or expand according to the top shelf height.
However, if starting with a part that is not full height, users should turn the feature off to avoid the part from changing size. Otherwise the Auto Height part will react to the change in component height instead of the empty space, which is likely where users want to “take” the change in height from.
GIF
To turn Auto Height off, go into the Properties [Part] under the Misc heading, and turn off the Auto Height option. With this feature turned off, it will lock the height of that part.
...
REMINDER OF COMPONENT DEPTH! [start here]
If you have a component with drawers, it may automatically double par for you. This is because when there is a change of depth and drawers are involved, a double par is required. This is ok if you are only changing the depth of one of your components and not the others (say a 24” deep drawer bank with 14” components on either side).
If you are intending to apply the depth to the rest of the wall, you will want to remove the double partitions because they are not necessary (left). You can do this in the component properties, under ‘Construction’, and unchecking the boxes for your left or right partitions. However, this will require you to adjust the widths, and it creates a lot of extra work.
The easiest way to approach this scenario is to plan before you change depths. If you uncheck the ‘Auto Partitions’ box in the ribbon toolbar, it will stop your components from double parring.
You may get a warning that states “Invalid Partition Depths” (right), but this will go away once you apply the depth to the wall. This method will save you a lot of time and energy if you are thinking ahead.
...
RELATED PAGES:
fghfghfgh<LINK>
fghfgh<LINK>