Versions Compared

Version Old Version 21 New Version 22
Changes made by

Aleeshya Broome

Aleeshya Broome

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Anchor
Top
Top

...

Expand
titleClick for visuals and more information

  • Ensure there is enough space in the van based on the number of drawers on the job. 

    • Drawers should be loaded flat (see table below for definition), with a blanket between the drawer and any material below.

Drawers in a Job Cart/Sled

Create a flat surface by laying similar size material together.  Lay a blanket on top of the cart/sled and lay the drawers flat on top of the blanket.

Drawers Hand-Loaded

Create a flat area in the van and place a blanket down.  Load the drawer boxes flat in the area.

Drawer Box Loading Definitions

 

If the installation is a multi-day install, bring drawer boxes separately on Day 2+, as needed.

...

Expand
titleClick for more information

  • Ensure you have a touch-up kit in the van.

  • Ensure you have enough runners and blankets.

  • Check your stock of screws in your tool box. Refill any screws you are low on, and ensure you have enough hardware for the upcoming installation.

  • If you have allowed for any tools to be borrowed, ensure you have received them back, or return any tools you may have borrowed.

  • Perform a final check to ensure you have all tools and hardware needed for the day.

  1. Perform the introductory call to the customer to advise you are on the way and your estimated time of arrival.

  2. Prepare to leave for the installation.  If multiple vans are going to the jobsite, coordinate any stops along the way, parking upon arrival, etc.

...

Anchor
Tips
Tips
Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

Panel
panelIconId1f5e3
panelIcon:speaking_head:
panelIconText🗣️
bgColor#DEEBFF

...