| Status | ||||
|---|---|---|---|---|
|
| Anchor | ||||
|---|---|---|---|---|
|
Introduction Blurb
Page Contents
Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Certification
Tips from the Field
Terms & Definitions
BOM Codes
| Anchor | ||||
|---|---|---|---|---|
|
Installer Level Required: Jr. Apprentice Installer, Apprentice Installer, Journeyman Installer, Senior Installer, Master Installer
Products Required: TFL Material, Accessories, Special Order
| Anchor | ||||
|---|---|---|---|---|
|
Tool #1
Tool #2
Tool #3
Tool #4
Tool #5
Tool #6
Tool #7
Tool #8
Tool #9
Hardware Required
Hardware #1
Hardware #2
Hardware #3
Hardware #4
Hardware #5
Hardware #6
| Anchor | ||||
|---|---|---|---|---|
|
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Personal Protective Equipment (PPE) must beworn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance. |
Installation Steps Go Here
| Anchor | ||||
|---|---|---|---|---|
|
Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix
| Anchor | ||||
|---|---|---|---|---|
|
Inspect the installation and complete any touch ups if necessary.
If there are no more components to install, remove all stickers/labels.
If there are no more components to install, complete the clean up process.
If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and deliveringthe final product.
| Anchor | ||||
|---|---|---|---|---|
|
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Certification Steps |
| Anchor | ||||
|---|---|---|---|---|
|
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
| ||||||||
Click here to submit your own tip from the field.
| Anchor | ||||
|---|---|---|---|---|
|
BOM | Bill of Materials; parts list |
| Anchor | ||||
|---|---|---|---|---|
|
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.
The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.