Versions Compared

Version Old Version 8 New Version 9
Changes made by

Aleeshya Broome

Aleeshya Broome

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents
Journeyman to Senior Installer

Status
colourGreen
titleLIVE
Anchor
Top
Top

The purpose of this page is to outline the process for installing lit glass shelving. Prior to beginning this process, ensure the system skeleton is complete. Refer to the basic and complex lighting pages for overall setup of a lighting network.

Page Contents

Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Certification
Tips from the Field
Terms & Definitions
BOM Codes

Anchor
Skill-Requirements
Skill-Requirements
Types of Installation: Off-the-Floor, Floor-Based

Installer Level Required: Journeyman Installer

Products Required: TFL Material, Accessories, Special Order

Back to top

Anchor
Tools-&-Hardware
Tools-&-Hardware
Tools Required

image-20240614-145719.png

1/2” Drill Bit

image-20240614-145744.png

Drill Driver/Impact Drill

image-20240614-145808.png

Rubber Gloves

image-20240614-145828.png

Glass Cleaner

Back to top

Anchor
Installation-Steps
Installation-Steps
Installation Steps

Panel
panelIconId1f9ba
panelIcon:safety_vest:
panelIconText🦺
bgColor#FFFAE6

Personal Protective Equipment (PPE) must be worn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.

  1. Test the light functionality.

Expand
titleClick here for more information

  • Connect the driver to an outlet and plug the light into the driver.

  • If the light is not functioning according to standard quality, contact the shop or warehouse to inquire about a replacement light.

  1. Install the shelf supports into the pre-drilled holes with the smaller tip facing up.

  2. Connect the shelf light lead to any required extensions.

  3. Pull the lead to the designated distribution box at the top or bottom of the component.

Use the rubber gloves when handling glass.

  1. Connect the shelf lead/extension to the distribution box and complete the network set up.

If the system contains backing, follow the lighting with backing process to create an access hole for the shelf’s light lead.

Refer to TAG Hardware’s Installation Manual for more information.

Back to top

Anchor
Related-Training-Materials
Related-Training-Materials
Related Training Materials

Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix

Back to top

Anchor
Final-Steps-&-Delivery
Final-Steps-&-Delivery
Final Steps & Delivery

  1. Inspect the installation and complete any touch ups if necessary.

  2. If there are no more components to install, remove all stickers/labels.

  3. If there are no more components to install, complete the clean up process.

  4. If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and deliveringthe final product.

Back to top

Anchor
Certification-Steps
Certification-Steps

Panel
panelIconId270d
panelIcon:writing_hand:
panelIconText✍️
bgColor#E3FCEF

Certification Steps:

  1. Lights were tested prior to installation, and are functioning.

  2. Lights function according to the required switch/remote/wall switch.

  3. All cables are hidden.

Back to top

Anchor
Tips
Tips
Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

Panel
panelIconId1f5e3
panelIcon:speaking_head:
panelIconText🗣️
bgColor#DEEBFF

Click here to submit your own tip from the field.

Back to top

Anchor
Terms
Terms
Terms & Definitions

BOM

Bill of Materials; parts list

Distribution Box

Box that plugs into the Driver which light leads and
switches plug into for connection.

Driver

Source of power for the distribution boxes and lights.

Elevation

The CAD Design Plan created by the Design Consultant
with the client.

Lead

The cord connecting the light to the distribution box.

Back to top

Anchor
BOM
BOM
BOM Codes
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.

IGS

Illuminated Glass Shelf

IGSF

Filler for Illuminated Glass Shelf

The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.

Back to top