Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

UNDER CONSTRUCTION

This page explains the steps to take for installing hampers. Prior to beginning the installation, ensure you completed all steps of installing the system skeleton.

Page Contents

Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Certification

Types of Installation: Floor-Based, Wall Bed

Installer Level Required: Apprentice Installer

Products Required: TFL Material, Accessories, Special Order

Back to top

Tools Required

image-20240423-140025.png

Drill Driver/Impact Drill

image-20240423-140049.png

Phillips #2 Screwdriver

Back to top

Installation Steps

Personal Protective Equipment (PPE) must be worn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.

  1. Locate and inspect materials.

 Click for more information

  • Ensure you have a hamper door, 2 hinges and 2 plates, 1 set of hamper arms.

    • Hamper arm set contains 2 hamper arms, 2 par brackets, and 2 door brackets.

  1. Attach the 2 hinge plates to the bottom shelf, and the 2 hinges to the door.

  2. Attach the hamper arm hardware to the partition and the door through the pre-drilled holes using provided screws.

 Click for visuals and more information

  • If the partition and door are not pre-drilled, the attachment points will need to be drilled and the duo stay arms attached following the engineering drawings.

image-20240423-140632.png

  1. Snap the hamper arms into the bracket on the partition.

  2. Snap the door hinges into place by sliding the door in a downward motion.

  3. Connect the hamper arms to the door.

  4. Test the functionality by opening and closing the door several times.

  5. With the door closed, adjust the hinges to align the door with above and adjacent doors and drawers. Ensure there are equal gaps.

Back to top

Related Training Materials

Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix

Back to top

Final Steps & Delivery

  1. Inspect the installation and complete any touch ups if necessary.

  2. If there are no more components to install, remove all stickers/labels.

  3. If there are no more components to install, complete the clean up process.

  4. If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and delivering the final product.

Back to top

Certification Steps:

  1. Hamper door opens and closes without rubbing or interfering with partition, door, or basket.

  2. Door is properly aligned on the cabinet with equal spacing around the perimeter.

  3. Door opens and closes with ease.

  4. Door opens far enough to allow bags or basket to come out.

  5. Stays are properly adjusted.

Back to top

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.
 

Questions? Please e-mail Aleeshya Broome (albroome@calclosets.com)