07. PRACTICE EXERCISES

EXERCISE 7-1 Add & Manipulate Parts

Building on what was learned in Section 7, add parts to the reach in closet space created in Exercise 6-2. Make a copy of that space and rename it “Ex 7-1”.

1. Using the parts menu of the ribbon toolbar, add the parts as shown in the elevation view below.

2. Manipulate parts (types, sizes, etc) as needed.

3. Select material or finish options for the design.

4. Save when complete.

5. Share with a sales manager or a veteran designer for feedback.

Open

Wall B ELV - Click to Zoom

Open

Wall B 3D - Click to Zoom

EXERCISE 7-2 Design a Pantry

Building on what was learned in Section 7, design a pantry. Use the design details listed to create a space and custom design for a fictional client based on the listed needs. There are no right/wrong answers; Just create the best design based on the customer’s needs and what has been learned so far.

1. Start by creating a new design in the Practice project file. Name this design “Ex 7-2”.

2. Fill in the required fields of the setup wizard using the information provided below.

3. Add additional design zones to walls where needed.

4. Design a system based on the customer needs listed below. Users can start with templates or from empty components.

5. Designate/change the main materials/finishes. Apply these changes to the space as needed.

6. Save when complete.

7. Share with a sales manager or a veteran designer for feedback.