Wardrobe lifts are a great addition to a space that has very high ceilings, or if the customer needs assistance reaching their clothes.
Select the wardrobe lift from the Accessories drop down. Left click to place in a component. Lifts automatically come in with the required fixed shelf above and below (unless it’s overriding an existing fixed shelf, such as a top shelf) and at the recommended height. Scrolling the mouse wheel will change the hang height before clicking, if desired.
Users can adjust the shelf below by using the + and – that appear at the bottom when hover over it to make the spacing taller if needed. Wardrobe lifts move and delete just like other parts <LINK>.
Lifts come in specific width ranges. If the user is trying to place in a width that is not supported, there will be a warning.
Left click on the wardrobe lift in the 3D view to show the customer how it will work.
WARDROBE LIFT PROPERTIES
Most locations offer two options of wardrobe lifts: A manual lift, and an automated one. They look slightly different, but behave similar ways, in CAD.
In Properties [Part], users can select if they would like an Automated lift (the default is manual) by checking the box. It is very important that users select the correct one as they are not priced the same, and one requires access to power. The Finish can also be changed here.
RELATED PAGES:
fghfghfgh<LINK>
fghfgh<LINK>