The following manipulations can be found in the Right Click menu while in the Elevation view.
MOVE / PUSH (Right Click > Move)
Users can adjust the position of a component after initially placing it (Right Click > Move). A component can only move to an empty or available space in a Design Zone. If you accidentally overlap an existing component, you will get a red warning X and you must adjust the location of either component.
Move: Allows a single component to move to any available space on a Design Zone or wall.
Push Left or Right: Pushes a component as far left or right as it can go without encountering another component, wall or obstacle. If you have multiple components that are already together, it will move them all if you select and push from the furthest component.
You can also move a component by double clicking directly on the component. Be aware that parts may get in the way of doing this, which would result in you moving the part instead.
When moving, regardless of the method, you can manually place the component where desired, or manually type in the offsets after left clicking to place (how far away from the wall you would like the component to sit).
CENTER (Right Click > Center)
SDFSDF
DELETE (Right Click > Delete OR Delete All)
SDFSDF
COPY / PASTE (Right Click > Copy OR Dynamic Copy OR Paste)
SDFSDF
ARRAY (Right Click > Array)
All components are added in the ELV view. A user can start with an empty component and add parts manually, or they can use Templates. <LINK>
support.
RELATED PAGES:
fghfghfgh<LINK>
fghfgh<LINK>