...
Click to zoom on images below
...
CUSTOM ADJUSTABLE DRILLING: Custom drilling for adjustable parts such as shelves and poles. By default, there are usually 3 holes drilled to allow for some adjustability but can be changed to any number of holes above/below using the Cluster Holes Above/Below fields in Component Properties.
...
...
CUSTOM FIXED DRILLING: Drilling for system holes only where necessary for shelving & accessories. Gives the appearance of “no holes” and is a cleaner look, although this means parts cannot be moved from where they are originally placed (therefore, certain parts such as adjustable shelves are not needed and the user may choose to design with only fixed shelves).
...
...
Drilling patterns can be visually checked by viewing the physical pattern in 3D view.
To change drilling patterns, users can edit in either component properties or in partition properties:
...
1
If users want to change the drilling patterns in the entire space, or apply to other components, edit the fields under the Drilling heading in Properties [Comp]. Change the Internal Drilling using the pulldown.
...
2
...
| Info |
|---|
Users can then apply this drilling to other components, the wall, or the room using the Apply properties to.. options at the bottom of the properties box. |
*Users may see the option to edit the location of the holes, although this should be done at the advice of a manager or plan reviewer.
...
RELATED PAGES:
...
fghfghfgh<LINK>
...
Do users have access to this?
...
RELATED PAGES: