Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Panels, often referred to as applied panels, can be used to create a decorative or accent panel on a specific area in (or between) a component(s). They are not structural, like true system backing. They will not be routed into the shelves or pars, but rather fit exactly into the space given.

...

Select Panel from the Other drop-down and left click to place into a component, or between components. It will automatically adjust to fit inside of a boundary created by a fixed shelf, upright shelf, partition, or other parts.

...

Info

If placing a panel into a multi-shelf group, it must be exploded <LINK> first.


If the cursor is further to the left of the panel when adding, it will sit at the back. If the cursor is more towards the right, it will sit at the front of the component.

...


Double click and hold to move the panel. It will automatically adjust if put into a space that is of a different size. Panels delete like other parts.

 

Note

The current version of the panel tool does not recognize suspension rails(this may even be visible in 3D depending on the material thickness), which means this could cause trouble when being installed. There are a few ways you can bypass this issue, either by changing the back offset (see below), by adding a faceplate <LINK>, or by discussing a solution with your design manager or production team in person.

PANEL PROPERTIES

Users can make adjustments to the panel in the Properties [Part].

...

Users can reference the dimensions, but as panels automatically fill the space, they cannot be edited here.

The Front/Back Offsets can be adjusted if the user prefers the panel to be set forward from the back of the design, or vice versa, for any reason - Just remember that there will need to be a method of installation considered.

The Finish can be selected. The user may see a variety of options including coordinated board material, EcoResin, glass, mirrors, and more. Rotate Grain will change the direction of the pattern or grain.

  

...

RELATED PAGES:

...

fghfghfgh<LINK>

...