Versions Compared

Version Old Version 6 New Version 7
Changes made by

Aleeshya Broome

Aleeshya Broome

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Table of Contents
Journeyman to Senior Installer

Status
colourYellow
titleIN REVIEW
Anchor
Top
Top

The purpose of this page is to outline instructions and considerations when installing all items related to a desk or home office set up.

Page Contents

Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Certification
Tips from the Field
Terms & Definitions
BOM Codes

Anchor
Skill-Requirements
Skill-Requirements
Types of Installation: Floor-Based, Wall Bed

Installer Level Required: Journeyman Installer

Products Required: TFL Material, Accessories, Special Order

Back to top

Anchor
Tools-&-Hardware
Tools-&-Hardware
Tools Required

image-20241121-134508.png

Drill Driver/Impact Drill

image-20241121-134527.png

Tape Measure

Hardware Required

image-20241126-154111.png

Acrylic Dividers

image-20241126-154140.png

Blotter

image-20241126-154157.png

Deluxe Sit-To-Stand
Richelieu: 50078290

image-20241126-154441.png

Double Monitor Arm
Richelieu: 500FP2290

image-20241126-154247.png

File Drawer Frame
Hafele: 422.74

image-20241126-154335.png

Keyboard Tray
Richelieu: 500848290

image-20241126-154357.png

Mini Pencil Drawer
Richelieu: 89320090

image-20241126-154220.png

Single Monitor Arm
Richelieu: 500FP1190

image-20241126-154507.png

Sit-to-Stand Workstation
Richelieu: 500S2S001R90

image-20241126-154527.png

Standard Sit-to-Stand
Richelieu: 50072L2S90

image-20241126-154615.png

Table Legs
Richelieu

image-20241121-134349.png

3/4” Screws

image-20241121-134414.pngImage Removed

3/4” Panhead Screws

image-20241121-134436.png

1/4” Washer

Back to top

Anchor
Installation-Steps
Installation-Steps
Instructions & Considerations

Panel
panelIconId1f9ba
panelIcon:safety_vest:
panelIconText🦺
bgColor#FFFAE6

Personal Protective Equipment (PPE) must beworn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.

Acrylic Dividers

If the accessory is a tray: Place the tray in its indicated location, as noted on the elevation

  • Place the horizontal and vertical dividers in their indicated orientation

    • .

    If the accessory is being placed in a drawer:

    1. If Applicable: Place the bottom pad in place.

    2. Place the horizontal and vertical dividers in their indicated orientation.

      1. If the dividers are only front-to-back, adhere the divider slides to the front and back from the drawer box. Slide the dividers into the slots.

    Blotter

    1. Place in position according to the text note on the elevation.

    2. Ensure it is correct side up (texture/design side facing up).

    3. Explain to the customer they can clean the blotter with a slightly damp cloth, or a shoe polish for surface scratches/marks.

    Deluxe Sit-To-Stand 

    Refer to the instructions provided by Richelieu

    Considerations:

    • The table base should be centered on the countertop.

    • Leave a minimum 0.5” to 1” gap overhang from the side edge to the leg frame.

    • Refer to pages 6 and 7 for programming instructions.

    • Programming notes should be included from the designer. If they are not:

      • Program 1: Lowest Height30”

      • Program 2: 30% Height36”

      • Program 3: 60% Height42”

      • Program 4: Highest Height48”

    • Leave programming instructions with the customer for future modifications.

    Double Monitor Arm

    Clamp-Mount: Refer to the instructions provided by Richelieu

    Grommet Instructions to be sent from Richelieu

    Considerations:

    • If there is a modest modesty panel, this accessory the clamp-mount arm cannot be installed.

    • Demonstrate the adjustability to the customerAnything around mounting of monitors????.

    • California Closets does not install monitors to monitor arms.

    File Drawer

    1. Install the drawer according to standard process.

    2. Demonstrate the file drawer system and its adjustability to the customer and, if applicable, encourage them to place a file folder inside.

    Keyboard Tray

    Refer to the instructions provided by Richelieu

    Considerations:

    • Spacing

    • Template

    • Anything

    • Use the template and screws provided.

    Mini Pencil Drawer

    Refer to the instructions provided by Richelieu

    Considerations:

    Spacing

  • Template

  • Anything

    • Single Monitor Arm

    Clamp-Mount: Refer to the instructions provided by Richelieu

    Grommet Instructions to be sent from Richelieu (coming)

    Considerations:

    • If there is a modest modesty panel, this accessory the clamp-mount arm cannot be installed.

    • Demonstrate the adjustability to the customerAnything around mounting of monitors????.

    • California Closets does not install monitors to monitor arms.

    Sit-To-Stand Workstation

    1. If Applicable: Assemble pieces out of the box.

    2. Place on the desk in the location indicated on the elevation.

    3. Place the cable wrap on the desk for the customer to use.

    4. Demonstrate how to use the cable wrap to the customer.

    5. Demonstrate lifting and lowering the workstation.

    Standard Sit-To-Stand     

    Refer to the instructions provided by Richelieu (coming)

    Considerations:

    • The table base should be centered on the countertop.

    • Leave a minimum 0.5” to 1” gap overhang from the side edge to the leg frame

    Table Legs: Round (5 holes)

    Table Legs: X Shaped (10 holes)

    • .

    Table Legs: U Shaped (4 holes)

    1. Place the countertop top side down on the floor.

    2. Place legs in position on bottom of countertop (spacing???)

    3. Mount using 3/4” panhead screws or a 3/4” screw with and, if applicable, 1/4” washer

      1. Round/Square Table Legs: Secure through all holes

      2. X-Shaped Table Legs: Secure through at least 4 holes

      3. U-Shaped Table Legs: Secure through all holes

    Back to top

    Anchor
    Related-Training-Materials
    Related-Training-Materials
    Related Training Materials

    Skeleton Fundamentals
    Complete the Installation
    System Touch Ups
    Cleaning the System & Jobsite
    Delivery to the Customer
    PPE Matrix

    Back to top

    Anchor
    Final-Steps-&-Delivery
    Final-Steps-&-Delivery
    Final Steps & Delivery

    1. Inspect the installation and complete any touch ups if necessary.

    2. If there are no more components to install, remove all stickers/labels.

    3. If there are no more components to install, complete the clean up process.

    4. If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and deliveringthe final product.

    Back to top

    Anchor
    Certification-Steps
    Certification-Steps

    Panel
    panelIconId270d
    panelIcon:writing_hand:
    panelIconText✍️
    bgColor#E3FCEF

    Certification Steps:

    Back to top

    Anchor
    Tips
    Tips
    Tips from the Field
    Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

    Panel
    panelIconId1f5e3
    panelIcon:speaking_head:
    panelIconText🗣️
    bgColor#DEEBFF

    Click here to submit your own tip from the field.

    Back to top

    Anchor
    Terms
    Terms
    Terms & Definitions

    BOM

    Bill of Materials; parts list

    Elevation

    The CAD Design Plan created by the Design Consultant with the client.

    Back to top

    Anchor
    BOM
    BOM
    BOM Codes
    The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.

    Text Note

    A text note will be included on the elevation to indicate any grommet’s location

    The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.

    Back to top