Can drawers are a popular addition to pantries , but can be used in any space. They are essentially regular drawers that are open on top (versus having a shelf on top, which is a default standard in most locations) to allow for taller items to be stored inside.
Start by adding drawers, leaving but leave a gap in between each one. A 3” space is pretty typical, but the spacing will vary depending on the client’s needs and the use of the drawer(s).
The next step is to remove the default fixed shelf between the drawer and the spacer above it. Open the part properties for Properties [Part] of the drawer and select Off in the Shelf Above field (under the Misc heading) to ignore/remove the shelf.
| Info |
|---|
Note that manually selecting and deleting a shelf may result in it popping back in when making additional changes to the parts or component. |
Use the ' Apply properties to.. Select’ to click on any other drawers that also need a shelf removed. This will eliminate the need from removing to remove them all one by one.
| Info |
|---|
Avoid applying to the entire comp, wall or room as it may accidentally remove needed shelves above other drawers. |
Faceless or scooped drawer fronts <LINK> are another popular choice for pantries and other similar storage needs.
RELATED PAGES:
fghfghfgh<LINK>