Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 6 Next »

The Materials tab is a quick way to change finishes on multiple parts within a design.


Locate the desired part button in the ribbon toolbar (ei. Main Materials), left click on the drop-down and select a finish. The different part buttons will dictate, specifically, what parts of the design are affected.


The finishes offered will only be those that are associated with that particular part(s). The user won’t be see finishes that are not supported.

You will see several finish options. ClosetCADPro will not apply a finish change to any accessory or part unless it is available as a finish for that part – Otherwise, it will pick the next closest finish.


RELATED PAGES:

  • No labels

©2024 California Closet Company, Inc.
All Rights Reserved.

These Training Materials are confidential, intellectual property of California Closet Company, Inc.  Any copying, disseminating, display, or use in any manner of the Training Materials without the prior written consent of a designated Human Resources or Legal Team Member of California Closet Company, Inc. is strictly prohibited and unlawful.