Epicor Dev2 is the Test environment. It is a point-in-time copy of Live. Its purpose is to allow Epicor Users to try out scenarios without effecting Live production processing.

Please follow the instructions below to install the Epicor client for the Test (Dev2) environment.

1. Use this link to download and Install Epicor Test Client

2. After you run the EXE to install the Epicor Test Client, find the “Epicor Software” folder on your desktop. 
   

   

3. Open the folder to “caldev.ctdcloud.com". 

   1. Right-click “Dev2 Environment", then Send To > Desktop.  

   2. Find the “Dev2 Environment" icon on your desktop and double-click it to complete the install. 

   3. Click the Dev2 icon once, then click the icon once more, and change the description to “Test (Dev2)”
      

      

4. Then logon as usual.

To install the Data Management Tool:

1. If you also need DMT, use the following link
   https://deployepicorcal.azureedge.net/epicor/installers/dev/CAL-DevDMTClientInstall.exe

2. Locate CAL-DevDMTClientInstall.exe in the system tray at the bottom of your monitor and run it to install the DMT Client.

3. Find the “Epicor Software” folder on your desktop.

   1. Open Epicor ERP10.2 Client

   2. Open caldev.ctdcloud.com

   3. Right-click Epicor Dev DMT > Send To > Desktop

   4. Locate Epicor Dev DMT on your desktop, double-click it, log on DMT.
      

      

If you run into trouble, please open an ERP Support Request ticket.