Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Version History

« Previous Version 6 Next »

IN REVIEW

This page explains the steps to take for installing TAG Everstyle Slides and all applicable inserts/accessories in the Everstyle collection. Prior to beginning the installation, ensure you have completed all steps of installing the system skeleton.

Page Contents

Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Tips from the Field
Terms & Definitions
BOM Codes

Types of Installation: Off-the-Floor, Floor-Based

Installer Level Required: Jr. Apprentice Installer

Products Required: TFL Material, Accessories

Back to top

Tools Required

Drill Driver/Impact Drill

Accessory Options

image-20240614-130310.png

Jewelry Drawer

image-20240614-130322.png

Shirt Drawer

image-20240614-130335.png

Skirt Organizer

image-20240614-130347.png

Pants Organizer

image-20240614-125721.png

Vanity Drawer

image-20240614-125801.png

Sunglasses Drawer

image-20240614-125847.png

Shirt Drawer

image-20240614-125904.png

Sock & Lingerie Drawer

image-20240614-125914.png

Tie & Belt Drawer

image-20240614-125953.png

Shoe Organizer

image-20240614-130015.png

Versatile Drawer

image-20240614-130026.png

Component Drawer

image-20240614-130115.png

Remote Drawer

image-20240614-130128.png

Divided Basket

image-20240614-130140.png

Deep Divided Basket

image-20240614-130154.png

Laundry Basket

Back to top

Slide & Face Installation Steps

Personal Protective Equipment (PPE) must be worn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.

  1. Separate and install drawer runners.

 Click for visuals and more information

  • Take the runners you have and separate them by left and right. Refer to the R and L markings on the drawer runners to assist in identifying their sides.

  • Set them in place where they go.

  • Line up the runners with the pre-drilled holes on the partition and screw them in place.

  • The 4th hole from the front of the runner should align with the front pre-drilled hole on the partition.

    • This will shift if the component is drilled for additional inset drawers.

  1. Attach the drawer front to the front of the drawer frame.

 Click for more information and visuals

  • Peel yellow backing from the tape.

  • Place the drawer front center on the frame.

    • If the drawer front is pre-drilled, line up the holes with the holes on the frame.

  • Press firmly to adhere.

  • If Applicable: Insert glass into the slot between the frame and the drawer front.

  • Secure the drawer front (and glass) with included screws.

  1. Install the drawer box on the runners.

 Click for more information

  • Pull the drawer runners out and set the drawer box on top, aligning the runners with the grooves on the bottom of the box.

  • Close the drawer to allow the runners to click into place

  • Test functionality by opening and closing the drawer twice.

The drawer frame must be inset with the partition, and the drawer face should have the correct overlay as indicated on the elevation (full, half, inset). Drawer runners may need to be shifted in order to achieve this.

  1. Install the inserts/accessories.

 Click for video and document links

Jewelry Drawer   
PDF     Video

Shirt Drawer   
PDF     Video

Skirt Organizer   
PDF     Video

Pants Organizer   
PDF     Video

Vanity Drawer   
PDF     Video

Sunglasses Drawer   
PDF     Video

Shirt Drawer   
PDF     Video

Sock & Lingerie Drawer   
PDF     Video

Tie & Belt Drawer   
PDF     Video

Shoe Organizer   
PDF     Video

Versatile Drawer   
PDF     Video

Component Drawer   
PDF     Video

Remote Drawer   
PDF     Video

Divided Basket   
PDF     Video

Deep Divided Basket   
PDF     Video

Laundry Basket   
PDF     Video

Back to top

Related Training Materials

Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix

Back to top

Final Steps & Delivery

  1. Inspect the installation and complete any touch ups if necessary.

  2. If there are no more components to install, remove all stickers/labels.

  3. If there are no more components to install, complete the clean up process.

  4. If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and delivering the final product.

Back to top

Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

Click here to submit your own tip from the field.

Back to top

Terms & Definitions

BOM

Bill of Materials; Parts list

Elevation

The CAD Design Plan created by the Design Consultant with the client.

Back to top

BOM Codes
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.

EVBA

Everstyle Divided Basket

EVCD

Everstyle Component Drawer

EVDB

Everstyle Deep Divided Basket

EVF

Everstyle Face

EVFC

Everstyle Drawer Face

EVGF

Everstyle Glass Front

EVJO

Everstyle Jewelry Drawer

EVLO

Everstyle Laundry Basket

EVPL

Everstyle Pant & Linen Drawer

EVRD

Everstyle Remote Drawer

EVSD

Everstyle Sock Drawer

EVSH

Everstyle Shoe Drawer

EVSK

Everstyle Skirt & Short Drawer

EVSO

Everstyle Sunglasses Drawer

EVST

Everstyle Shirt Drawer

EVTB

Everstyle Tie & Belt Drawer

EVVA

Everstyle Vanity Drawer

EVVD

Everstyle Versatile Drawer

EVVF

Everstyle Vanity Face

PR

Pant/Skirt Rack

Text Note

Everstyle Accessory

The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.

Back to top

  • No labels

Questions? Please e-mail Aleeshya Broome (albroome@calclosets.com)