Office Accessories: Desk

Table of Contents
Journeyman to Senior Installer

IN REVIEW

The purpose of this page is to outline instructions and considerations when installing all items related to a desk or home office set up.

Page Contents

Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Certification
Tips from the Field
Terms & Definitions
BOM Codes

Types of Installation: Floor-Based, Wall Bed

Installer Level Required: Journeyman Installer

Products Required: TFL Material, Accessories, Special Order

Back to top

Tools Required

Hardware Required

Back to top

Instructions & Considerations

Acrylic Dividers

If the accessory is a tray:

1. Place the tray in its indicated location, as noted on the elevation

2. Place the horizontal and vertical dividers in their indicated orientation

If the accessory is being placed in a drawer:

1. If Applicable: Place the bottom pad in place

2. Place the horizontal and vertical dividers in their indicated orientation

Blotter

1. Place in position according to the text note on the elevation.

2. Ensure it is correct side up (texture/design side facing up)

Deluxe Sit-To-Stand 

Refer to the instructions provided by Richelieu

Considerations:

• The table base should be centered on the countertop

• Leave 0.5” to 1” gap from the side edge to the leg frame

• Refer to pages 6 and 7 for programming instructions

• Programming notes should be included from the designer. If they are not:

  • Program 1: Lowest Height

  • Program 2: 30% Height

  • Program 3: 60% Height

  • Program 4: Highest Height

Double Monitor Arm

Refer to the instructions provided by Richelieu

Considerations:

• If there is a modest panel, this accessory cannot be installed

• Demonstrate the adjustability to the customer

• Anything around mounting of monitors????

File Drawer

1. Install the drawer according to standard process.

2. Demonstrate the file drawer system to the customer and, if applicable, encourage them to place a file folder inside.

Keyboard Tray

Refer to the instructions provided by Richelieu

Considerations:

• Spacing

• Template

• Anything

Mini Pencil Drawer

Refer to the instructions provided by Richelieu

Considerations:

• Spacing

• Template

• Anything

Single Monitor Arm

Refer to the instructions provided by Richelieu

Considerations:

• If there is a modest panel, this accessory cannot be installed

• Demonstrate the adjustability to the customer

• Anything around mounting of monitors????

Sit-To-Stand Workstation

1. Place on the desk in the location indicated on the elevation.

2. Place the cable wrap on the desk for the customer to use.

3. Demonstrate how to use the cable wrap to the customer.

4. Demonstrate lifting and lowering the workstation.

Standard Sit-To-Stand     

Refer to the instructions provided by Richelieu

Considerations:

• The table base should be centered on the countertop

• Leave 0.5” to 1” gap from the side edge to the leg frame

Table Legs: Round (5 holes)

Table Legs: X Shaped (10 holes)

Table Legs: U Shaped (4 holes)

1. Place the countertop top side down on the floor.

2. Place legs in position on bottom of countertop (spacing???)

3. Mount using 3/4” panhead screws or a 3/4” screw with 1/4” washer

Back to top

Related Training Materials

Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix

Back to top

Final Steps & Delivery

1. Inspect the installation and complete any touch ups if necessary.

2. If there are no more components to install, remove all stickers/labels.

3. If there are no more components to install, complete the clean up process.

4. If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and delivering the final product.

Back to top

Back to top

Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

Click here to submit your own tip from the field.

Back to top

Terms & Definitions

Back to top

BOM Codes
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.

The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.

Back to top