TAG Engage Accessories

Table of Contents
Jr. Apprentice to Apprentice Installer

LIVE

This page explains the steps to take for installing TAG Engage Slides and all applicable inserts/accessories in the Engage collection. This includes the Jewelry Drawer, Shoe Organizer. Prior to beginning the installation, ensure you have completed all steps of installing the system skeleton.

Page Contents

Skill Requirements
Tools & Hardware
Slide Installation Steps
Divided Deep Drawer
Divided Shelf
Folding Station
Jewelry Organizer
Laundry Organizer
Lingerie Drawer
Pant Organizer
Shoe Organizer
Related Training Materials
Final Steps & Delivery
Tips from the Field
Terms & Definitions
BOM Codes

Types of Installation: Off-the-Floor, Floor-Based

Installer Level Required: Jr. Apprentice Installer

Products Required: TFL Material, Accessories

Back to top

Tools Required

Drill Driver/Impact Drill

Accessory Options

Divided Deep Drawer

Divided Shelf

Folding Station

Jewelry Organizer

Laundry Organizer

Lingerie Drawer

Pant Organizer

Shoe Organizer

Back to top

Slide Installation Steps

Personal Protective Equipment (PPE) must be worn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.

Press on each corner of the frame to ensure it is level.

Mount slides to System 32 holes on each partition using the provided screws. Refer to the system’s elevation for the mounting height.
1. When not extended, the front of the slides should sit close to flush with the front of the partition.

Slide black plastic clips to the front of each runner.
Place the rear of the frame onto the slides and push them toward the back at an angle into the rear slot. Press the front of the frame down, snapping the frame onto the slide arms.

Click black clips into the front of the frame’s track.

Install accessory. Select the appropriate accessory below for insertion instructions.

Divided Deep Drawer

Insert the flat bottom into the drawer bag.

Slide the cross bars through the pocket on each side and rest on the drawer frame.

Attach the divider clips on the front and back of the frame. This process will need to be demonstrated to the customer upon system delivery in the instance they would like to move the dividers.

Insert each divider into the clips.

Divided Shelf

Attach the divider clips on the front and back of the frame. This process will need to be demonstrated to the customer upon system delivery in the instance they would like to move the dividers.
Insert each divider into the clips.

Folding Station

Insert bottom board into folding station frame.

Insert fabric-wrapped top piece on bottom board.

Jewelry Organizer

Insert the rubber strip into the channel across the back of the frame.

Insert dividers to create customer-desired configuration. This process will need to be demonstrated to the customer upon system delivery in the instance they would like to move the dividers.

Laundry Organizer

Insert handles into the loops inside the bags, and place bags into the frame from underneath. This process will need to be demonstrated to the customer upon system delivery.

Lingerie Drawer

Pant Organizer

Shoe Organizer

Back to top

Related Training Materials

Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix
Product Feedback Form

Back to top

Final Steps & Delivery

Inspect the installation and complete any touch ups if necessary.
If there are no more components to install, remove all stickers/labels.
If there are no more components to install, complete the clean up process.
If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and delivering the final product.

Back to top

Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

Click here to submit your own tip from the field.

Back to top

Terms & Definitions

BOM	Bill of Materials; parts list
Elevation	The CAD Design Plan created by the Design Consultant with the client.
System 32	The lines on the edge of each par show where the System 32 bore holes are. System 32 is a drilling pattern for cabinet sides and pars consisting of 5mm diameter holes drilled on 32mm centers. On each par, there are 2 lines of holes and can be drilled as half-bore (not all the way through the par) and through-bore (all the way through the par). The horizontal lines on each par show the exact location of the System 32 holes. The diameter of the line indicates if the hole is half-bore or through-bore.

Back to top

BOM Codes
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.

EN	Tag Engage Systems
ENF	Tag Engage Face
TEA	Engage Pant Organizers
TEB	Engage Pull Out Shelf
TEC	Engage Lingerie Drawer
TED	Engage Deep Divided Basket
TEE	Engage Laundry Organizers
TEF	Engage Pull Out Shoe
TEG	Engage Storage Box
TEH	Engage Folding Station
TEI	Engage Lingerie Divider
TEJ	Engage Deep Divider
TEK	Engage Jewellery Organizer
TEL	Engage Acessory Divider
TEM	Engage Laundry Hamper
TEN	Engage Pant Rack with Hangers
TEO	Engage Base
TEP	Engage Edge
TEQ	Engage Adapter

The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.

Back to top

California Closets Installation Manual

TAG Engage Accessories

Questions? Please e-mail Aleeshya Broome (albroome@calclosets.com)