A drawer insert can be added to an existing drawer by right clicking on the drawer and selecting Properties [Parts]. There is a series of Insert pull-down selections under the Box heading. These options may vary by location and availability.
There are
The various filters to narrow down the options for inserts. The insert options will also vary depending on the width, height and depth of the drawers. Small and medium drawers tend to hold jewelry trays and other shallow inserts, while the large or XL drawers will likely hold storage cubbies and dividers.
| Info |
|---|
Refer to the most recent Standard Product Guide or a sales manager for more information on specific offerings per location. |
Depending on what which insert is selected, a short description will show on the front of the drawer box to be clear what is inside. The 3D view will also show a representation of that insert.
Inserts will automatically adjust their size if making changes to the widths or depths of the drawers or /components that hold them. If the drawer is resized smaller or larger than the available width of the inserts, they will kick off and remove themselves be removed from the design. This will also likely happen happens with non-standard widths.
Add locks to drawers by going to under the Lock heading in drawer properties, just below Hardware.
| Note |
|---|
Note that certain locks have restrictions, so reference the Standard Product Guide for full information. |
RELATED PAGES: