Drawer Inserts & Locks

A drawer insert can be added to an existing drawer by right clicking on the drawer and selecting Properties [Parts]. There is a series of Insert pull-down selections under the Box heading. These options may vary by location and availability.

The various filters narrow down the options for inserts. The options will also vary depending on the width, height and depth of the drawers. Small and medium drawers tend to hold jewelry trays and other shallow inserts, while the large or XL drawers will likely hold storage cubbies and dividers.

GIF - Click to Zoom

Refer to the most recent Standard Product Guide or a sales manager for more information on specific offerings per location.

Depending on which insert is selected, a short description will show on the front of the drawer box. The 3D view will also show a representation of that insert.

Inserts automatically adjust size if making changes to the widths or depths of the drawers/components that hold them. If the drawer is resized smaller or larger than the available width of the inserts, they will be removed from the design. This will also happens with non-standard widths.

Add locks to drawers under the Lock heading in drawer properties, just below Hardware.

Note that certain locks have restrictions, so reference the Standard Product Guide for full information.

RELATED PAGES: