Engage Pull-Outs

The Engage product line is a series of coordinating pull-out baskets and organizers.

Open

Open

Select any of the Engage items from the Pull-Out (or other, see above) drop down. All Engage parts behave the same way.

Engage parts can be placed in components that are standard widths and depths, otherwise the user may receive a warning.

Just like when adding a hamper, scrolling the mouse wheel before placing increases the space below the part. Left click to insert. The + and - buttons that appear when hovering over the part will be used to resize after in place.

Engage parts move and delete the same way as other parts.

ENGAGE PART PROPERTIES

In the Properties [Part], users can change the Product between different Engage items without having to delete and select a different option. Note that parts may not be the same height.

Users can change Frame finish, Fabric colors, and inserts. The Insert option allows the selection of organizers or specific dividers and varies for the part being edited.

Override Edge adds edge banding to the front versus a strip of fabric.

A Front can be added to Engage items (check the box), which will then allow users to further select the adapters, finish and hardware.

Users can select white or black adaptors depending on the system finish. Note that these faces do not cover the entire item but is instead an alternative to the edge-banded or fabric with metal fronts.

Offsets are used if putting Engage parts behind doors.

RELATED PAGES:

• Edit Parts

• Apply Properties

• Engage Shoe Pull-Out

• Accessories