Table of Contents
Journeyman to Senior Installer
IN REVIEW
The purpose of this page is to outline instructions and considerations when installing all items related to a desk or home office set up.
Page Contents
Skill Requirements
Tools & Hardware
Installation Steps
Acrylic Dividers
Blotter
Deluxe Sit-to-Stand
Double Monitor Mount
File Drawer Frame
Keyboard Tray
Mini Pencil Drawer
Single Monitor Mount
Sit-to-Stand Workstation
Standard Sit-to-Stand
Table Legs
Related Training Materials
Final Steps & Delivery
Certification
Tips from the Field
Terms & Definitions
BOM Codes
Types of Installation: Floor-Based, Wall Bed
Installer Level Required: Journeyman Installer
Products Required: TFL Material, Accessories, Special Order
Tools Required
Drill Driver/Impact Drill
Tape Measure
Hardware Required
Acrylic Dividers
Blotter
Deluxe Sit-To-Stand
Richelieu: 50078290
Double Monitor Arm
Richelieu: 500FP2290
File Drawer Frame
Hafele: 422.74
Keyboard Tray
Richelieu: 500848290
Mini Pencil Drawer
Richelieu: 89320090
Single Monitor Arm
Richelieu: 500FP1190
Sit-to-Stand Workstation
Richelieu: 500S2S001R90
Standard Sit-to-Stand
Richelieu: 50072L2S90
Table Legs
Richelieu
3/4” Screws
1/4” Washer
Instructions & Considerations
Personal Protective Equipment (PPE) must be worn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.
Acrylic Dividers
If the accessory is a tray: Place the tray in its indicated location, as noted on the elevation.
If the accessory is being placed in a drawer:
If Provided: Place the bottom pad in place.
Place the horizontal and vertical dividers in their indicated orientation.
If the dividers are only front-to-back, adhere the divider slides to the front and back from the drawer box. Slide the dividers into the slots.
Blotter
Place in position according to the text note on the elevation.
Ensure it is correct side up (texture/design side facing up).
Explain to the customer they can clean the blotter with a slightly damp cloth, or a standard shoe polish for surface scratches/marks.
Deluxe Sit-To-Stand
Refer to the instructions provided by Richelieu
Considerations:
Using the provided instructions, confirm you have all parts and pieces
The table base should be centered on the countertop.
Leave a minimum 0.5” overhang from the side edge to the leg frame.
Refer to pages 6 and 7 in the Richelieu manual (linked above) for programming instructions.
Programming notes should be included from the designer. If they are not:
Program 1: 30”
Program 2: 36”
Program 3: 42”
Program 4: 48”
Leave programming instructions with the customer for future modifications.
Be aware of when a team lift is necessary based on the countertop size and weight.
Double Monitor Arm
Clamp-Mount: Refer to the instructions provided by Richelieu
In-Surface Instructions to be sent from Richelieu
Considerations:
Using the provided instructions, confirm you have all parts and pieces
If there is a modesty panel, the clamp-mount arm cannot be installed. Contact the design consultant if you encounter this situation.
Demonstrate the adjustability to the customer.
California Closets does not install monitors to monitor arms.
File Drawer
Install the drawer according to standard process.
Demonstrate the file drawer system and its adjustability to the customer and, if applicable, encourage them to place a file folder inside.
Keyboard Tray
Refer to the instructions provided by Richelieu
Considerations:
Using the provided instructions, confirm you have all parts and pieces
Use the template and screws provided.
Refer to engineering drawings for attachment locations:
Mini Pencil Drawer
Refer to the instructions provided by Richelieu
Single Monitor Arm
Clamp-Mount: Refer to the instructions provided by Richelieu
In-Surface Instructions to be sent from Richelieu (coming)
Considerations:
Using the provided instructions, confirm you have all parts and pieces
If there is a modesty panel, the clamp-mount arm cannot be installed. Contact the design consultant if you encounter this situation.
Demonstrate the adjustability to the customer.
California Closets does not install monitors to monitor arms.
Sit-To-Stand Workstation
Refer to the instructions provided by Richelieu
Using the provided instructions, confirm you have all parts and pieces
If Applicable: Assemble pieces out of the box.
Place on the desk in the location indicated on the elevation.
Place the cable wrap on the desk for the customer to use.
Demonstrate how to use the cable wrap to the customer.
Demonstrate lifting and lowering the workstation.
Leave instructions behind for the customer’s use.
Standard Sit-To-Stand
Refer to the instructions provided by Richelieu
Considerations:
Using the provided instructions, confirm you have all parts and pieces
The table base should be centered on the countertop.
Leave a minimum 0.5” overhang from the side edge to the leg frame.
Be aware of when a team lift is necessary based on the countertop size and weight.
Table Legs
Using the provided instructions, confirm you have all parts and pieces
Place the countertop top side down on the floor. Use a drop cloth to protect the countertop.
Place legs in position on bottom of countertop
Mount using 3/4” screw and, if applicable, 1/4” washer
Round/Square Table Legs: Secure through all holes
X-Shaped Table Legs: Secure through at least 4 holes
U-Shaped Table Legs: Secure through all holes
Be aware of when a team lift is necessary based on the countertop size and weight.
Related Training Materials
Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix
Product Feedback Form
Final Steps & Delivery
Inspect the installation and complete any touch ups if necessary.
If there are no more components to install, remove all stickers/labels.
If there are no more components to install, complete the clean up process.
If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and delivering the final product.
Certification Steps:
Acrylic Dividers
Pieces are inspected for cracks or damage.
All pieces have been used and inserted into each other correctly.
Accessory fits in drawer space.
If Applicable: Velvet liner inserted at the bottom of the drawer.
Deluxe Sit-to-Stand
Desk works by moving up or down when pushing the buttons
The countertop has been centered on the legs to create equal balance.
Cords have been tucked away according to cable management practices.
Double Monitor Mount
Clamp: The clamp has been tightened.
In-Surface Mount: The hardware has been installed and is secured.
The mount functions and has space to move around.
The Allen key has been left for the customer.
The mount has been demonstrated to the customer.
Keyboard Tray
The tray pulls in and out as designed.
All securement points have been used.
The customer has been educated on how to use the accessory.
Mini Pencil Drawer
The pencil drawer pulls in and out as designed.
All securement points have been used.
The customer has been educated on how to use the accessory
Single Monitor Mount
Clamp: The clamp has been tightened.
In-Surface Mount: The hardware has been installed and is secured.
The mount functions and has space to move around.
The Allen key has been left for the customer.
The mount has been demonstrated to the customer.
Sit-to-Stand Workstation
The unit is sitting firmly and level on the desk space.
The up and down movement is functional and smooth.
Any moving trays or work surfaces function properly and smooth.
The workstation has been demonstrated to the customer.
Standard Sit-to-Stand
The desk works by moving up or down when pushing the buttons.
The countertop has been centered on the legs to create equal balance.
Cords have been tucked away according to cable management practices.
Table Legs
Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.
Click here to submit your own tip from the field.
Terms & Definitions
BOM | Bill of Materials; parts list |
Elevation | The CAD Design Plan created by the Design Consultant with the client. |
BOM Codes
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.
CTL | Countertop Leg |
STSB | Sit To Stand Base |
STST | Sit To Stand Table |
Text Note | A text note will be included on the elevation to indicate any grommet’s location |
TT | Table Top |
The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.
Add Comment