...
...
...
...
...
Click to zoom on images below
...
CUSTOM ADJUSTABLE DRILLING: Custom drilling for adjustable parts such as shelves and poles. By default, there are usually 3 holes drilled to allow for some adjustability but can be changed to any number of holes above/below using the Cluster Holes Above/Below fields in Component Properties.
...
...
CUSTOM FIXED DRILLING: Drilling for system holes only where necessary for shelving & accessories. Gives the appearance of “no holes” and is a cleaner look, although this means parts cannot be moved from where they are originally placed (therefore, certain parts such as adjustable shelves are not needed and the user may choose to design with only fixed shelves).
...
...
Drilling patterns can be visually checked by viewing the physical pattern in 3D view.
To change drilling patterns, users can edit in either component properties or in partition properties:
...
1
If users want to change the drilling patterns in the entire space, or apply to other components, edit the fields under the Drilling heading in Properties [Comp]. Change the Internal Drilling using the pulldown.
...
2
...
| Info |
|---|
Users can then apply this drilling to other components, the wall, or the room using the Apply properties to.. options at the bottom of the properties box. |
*Users may see the option to edit the location of the holes, although this should be done at the advice of a manager or plan reviewer.
...
RELATED PAGES:
...
fghfghfgh<LINK>
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Drilling zones are a feature found on engineer keys only. |
Drilling Zones can be used to highly customize a design and is a feature that places specific drilling patterns on a selected area of a partition. Drilling Zones are found in the Tools section of the Elevation ribbon toolbar.
...
Once selected, users can scroll the mouse wheel (or use the up/down keyboard keys) to change the height of the drilling zone. Left click to place.
...
Drilling zones move and delete like other parts. Right click to access Properties [Part]. This is where users can select the drilling mode and overall height (mm).
...
Use the Apply properties to.. feature at the bottom of the properties box to apply to other zones.
...
Drilling zones will show up as green blocks in the 3D view. This can be turned on/off using the Show Drilling Zones check box in the Parts section of the 3D ribbon toolbar.
...
...
RELATED PAGES: