Fusion track walls are added using the Board tool. Fusion Track Walls behave differently than other Board options. They are constructed with aluminum rails that a variety of tools and hooks can be placed onto.
Fusion track walls have more functionality and options to edit than a manual panel or fabric board. Like cleat hooks, editing can be broken into parts.
To add, select the Board tool from the ribbon toolbar. Click, hold and drag to the desired size and release to place. This adds a manual panel by default.
Right click to go into Properties [Board] and change the Style to Fusion Track Wall.
BOARD PROPERTIES
Once Fusion Track Wall is selected as the board Style in Properties [Part], users can select the Finish. This is referring to the material between the metal tracks.
Users can manually type in new Width or Height dimensions (alternative methods include pulling the corners of the box or double clicking on the dimension line around it) and select the height from the floor and side walls. Display All Dims turns the dimensions on or off.
Under Fusion System heading, select the track quantity and track color (if available). The track quantity depends on available space, what is being stored, and how many hooks will be added.
If checked, Add Panels & Edge means there is material (selected under Finish) between the rails. This is common in more polished spaces such as craft rooms. If unchecked, the space between the tracks will be open to the wall. This is a great look for garages and helps keep the cost lower.
WITH PANELS + EDGES | WITHOUT PANELS + EDGES |
|---|---|
 |  |
 |  |
EDIT BOARD & ADD HOOKS
Once the specifics are set in Board properties, users can continue to edit the Fusion Track Wall in elevation view. When right clicking on the board, varied menu options will appear depending on the location of the mouse.
When the board is yellow, right click to edit the whole board properties. There will be options to Copy or Delete the board (note that Delete All will delete everything in the whole design zone) and to turn Toggle Move Track Mode on or off.
When this feature is on, it will allow users to adjust the location of the track on the board. Select the same option to turn the feature off. Choose Reset Track Positions if wanting to return to the default track position.
There does not need to be space in between tracks if desired as they can stack directly on top of each other.
When hovering over a track and right clicking, it will allow users to access the same board properties but also track properties. It gives the option to Move Board and add hooks to the track(s).
There are different hook categories: Standard, Garage, Closet and Office. Of course, these hooks can be used anywhere. To add hooks, search through any of the options listed, and select a hook to add.
When hovering over a hook, a label appears to show the type of hook (below). When not hovering over, a code will show (right; this can be checked in the Parts List).
Right click on the hook for options to Move or Delete it. Users can also double click to move. Hooks can be moved to different tracks.
Most hooks will be realistically represented in the 3D view. This example shows a Fusion Track Wall with panels and edges added.
Customers can add more hooks at a later time as needed.
RELATED PAGES: