Do not delete any job or service until you send an email to the RBU explain why.

1. In Combo Form, Material Order does not match CutRite.

2. Parts that are either to small or too long= more than 9ft.

3. Vertical divider, top and bottom shelves are adjustable or one of them.

4. In tars, missing Combo Form, CADPro or both.

5. System with backing does not look right, shelves are deeper that they should be.

6. Corner shelves designed as connector shelves.

7. 1/4 “backing with no grooving.

8. Virtuoso shelves that are not 29mm nor 30mm.

9. In M.O and C.R, not specifying shelves type.

10. Sending a service in CADPro file without removing unwanted parts.

11. In Comb form, C.R has no EB info except “6mm, 8mm, 3/4 backing.

12. Zip file with multiple jobs.

13. Adjustable corner or connector shelves.

14. If the RBU askes you do reject a job or a service.