Completing a Skill Certification Page
- Aleeshya Broome-Cordon
Certification Pages are fillable utilizing Adobe Acrobat (or a similar PDF editor), or by printing and completing by hand.
Complete the Name and Assessor fields using the installer’s name and yours as the certifier, respectively.
Each certification attempt is an individual box on the certification page.
For each attempt, fill in the Date field for the day it takes place.
As the installer completes the demonstration, observe and indicate if each certification step/criteria is hit.
Certification steps/criteria can be found in the installation manual for each hard skill, as well as on the certification page.
At the end of the demonstration, if the installer has successfully demonstrated all criteria, check the Successful box for the attempt.
If the installer has not successfully demonstrated all criteria, check the Unsuccessful box for the attempt.
Provide notes and feedback in the box below the certification steps/criteria in the attempt’s box.
Once an installer has successfully completed the required number of successful attempts, complete the Certified Date with the date of the last attempt.
Standard Certification Method = 3 Successful Attempts
Expedited Certification Method = 1 Successful Attempt
The certified date will carry through to the installer’s scorecard, so it is important to note this information
Upon completion of the skill’s certification, complete the Installer Signature and Assessor Signature.
NEXT: Uploading a Skill Certification Page