Maddox

Owned by Aleeshya Broome, created
Last updated: Jul 10, 2024
4 min read

Table of Contents
Apprentice to Journeyman Installer

IN REVIEW

The purpose of this page is to outline the steps to install a TAG Maddox system. Refer to the videos on 360Share for additional visuals.

Page Contents

Skill Requirements
Tools & Hardware
Installation Steps
Related Training Materials
Final Steps & Delivery
Certification
Tips from the Field
Terms & Definitions
BOM Codes

Types of Installation: Off-the-Floor

Installer Level Required: Apprentice Installer

Products Required: Accessories, Special Order

Back to top

Tools Required

image-20240618-131807.png

Drill Driver/Impact Drill

image-20240618-131820.png

1/2” Drill Bit

Allen Wrench
(Included)

Tape Measure

2' Level

Rubber Mallet (White)

 

Hardware Required

3/16” Toggles & Bolts

 

 

Back to top

Installation Steps

Personal Protective Equipment (PPE) must be worn at all times when handling material and operating the power tools mentioned throughout this process. Review the PPE Matrix for further guidance.

  1. Ensure you have all pieces.

  • You should have both vertical and horizontal pieces.

  • You should have all indicated accessories.  Refer to the BOM to ensure all are included.

  1. Attach the verticals and the horizontals together using the included hardware. Ensure it is assembled square.

  • Using your tape measure, measure from corner-to-corner diagonally.

  • Both diagonals should be an equal measurement; this confirms the unit is square.

  1. Attach to the wall using included hardware and toggles.

  • Make sure the unit is plumb and level before drilling any holes into the wall.

  1. Install accessories.

  • If the customer is present for the installation, leave 2-3 uninstalled. You can show the customer how to install them during the final walkthrough.

    • Show them how to install one, and then guide them through installing it and answer any questions.

  • If the customer is not present, install all accessories as indicated on the elevation.

  1. Clean up all tubes and packaging.

 

Back to top

Related Training Materials

360Share Maddox Videos
Skeleton Fundamentals
Complete the Installation
System Touch Ups
Cleaning the System & Jobsite
Delivery to the Customer
PPE Matrix

Back to top

Final Steps & Delivery

  1. Inspect the installation and complete any touch ups if necessary.

  2. If there are no more components to install, remove all stickers/labels.

  3. If there are no more components to install, complete the clean up process.

  4. If there are no more components to install, complete the Professional Installation Experience by walking through the space with the customer and delivering the final product.

Back to top

Certification Steps:

  1. Unit is installed level and plumb.

  2. All accessories are installed.

  3. If Applicable: Accessories are demonstrated during final customer walkthrough.

Back to top

Tips from the Field
Tips submitted by fellow installers and leaders in the field. These optional tips are intended to make this install process simpler.

 

Click here to submit your own tip from the field.

Back to top

Terms & Definitions

BOM

Bill of Materials; parts list

Elevation

The CAD Design Plan created by the Design Consultant with the client.

Back to top

BOM Codes
The purpose of this section is to provide guidance when confirming details on the BOM. This list includes all individual parts typically associated with this process.

WMCH

Wall Mount Organizer Coat Hook

WMHB

Wall Mount Organizer Horizontal Bar

WMJH

Wall Mount Organizer Jewelry Hook

WMLP

Maddox Leather Pocket

WMLSH

Wall Mount Organizer Large Shoe Hook

WMO

Wall Mount Organizer

WMOSO

Maddox Standoffs (set of 4)

WMPLB

Maddox Pencil Holder

WMPLBJ

Maddox Pencil Tray with 3 Containers

WMPLT

Maddox Pencil Tray

WMPRT

Maddox Paper Tray

WMSH

Wall Mount Organizer Shoe Hook

WMSM

Maddox Small Mirror

WMSSH

Wall Mount Organizer Small Shoe Hook

WMTH

Wall Mount Organizer Triple Hook

WMTS

Maddox Tablet Stand

WMTSW

Maddox Tablet Stand with Whiteboard

WMVB

Wall Mount Organizer Vertical Bar

The codes in the table above are directly from the Corporate CAD database and may not reflect all codes included in the Supported Franchise Database or Independent Franchise Databases.

Back to top

Questions? Please e-mail Aleeshya Broome (albroome@calclosets.com)